Tag Archives: power
Radio Controlled Boats (Page 1 of 2)
A radio controlled boat (or RC boat) is a boat controlled remotely with radio control equipment. Electric Sport boats are the most common type of boat amongst casual hobbyists. Hobby quality boat speed generally start at around 20MPH and go up from there, and can be just as fast or faster than their internal combustion counterparts, with the latest in Lithium Polymer and Brushless motor technology. Ready to run speed boats from Aqua Craft, Pro Boat and Offshore Electrics can reach speeds over 40 mph out of the box and with modifications can reach well into the 50-60 mph range. These types of boats are referred to as hobby grade and can be found only at hobby shops and retailers. Toy grade boats which are obtained through mass consumer retailers, are generally much slower and their maximum speeds are usually less than 15MPH. Scale boats are replicas of full size boats. They can be small enough to fit into your hand, or large, trailer transported models weighing hundreds of pounds. More often than not they are a miniaturized version of a prototype, built using plans and/or photos, although there are variants that utilize freelance designs. An offshoot of this style of marine RC’s is radio controlled submarines.
Power boats are typically Fast electric or internal combustion, (ignition engine or glow plug RC engine based) and some are steam powered (conventional type, and also flash steam). (At one time some boats used engines working on the compression ignition principle. These were not diesels in the true sense of the word but the modelling fraternity frequently referred to them as such. A few enthusiasts still operate such engines.) The power is commonly used to rotate a submerged propeller, aircraft propeller or jet which in turn provide the thrust to move the craft. Typically power boats have two controls, rudder, outboard motor or stern drive and throttle control. Powered scale boats will often have additional remote controlled functions to improve realism, e.g. sounding fog horns, rotating radar antennae etc. Some of the more sophisticated powered racing boats may also have additional remote controlled functions. These may include remote mixture control allowing the driver to optimise the fuel/air mixture during a race. Another function occasionally implemented for racing boats using a surface piercing propellor is remote control of depth or angle of thrust. There are three main types of power boat. RTR (ready to run), ARTR (almost ready to run), and kit versions are available. All thoroughbred racing boats are made from kits and the builders add their own gear and radio.
Radio controlled racing boats are designed for maximum speed and maneuverability. Various styles of racing include circuits of different shapes laid out on the water with buoys. The most common courses are the 1/6 mile oval that consists of 330′ straight sections followed by 70′ diameter turns. The International Model Power Boat Association (IMPBA) as well as the North American Model Boat Association (NAMBA) have specific rules and regulations to address the course, race rules, and formats. In addition to oval racing there are straight a way (SAW) racing. This is a contest to see how fast you can make the boat go in a straight line. Timed events are held where the boats need to go through a starting light and an ending light. The speed is calculated by the timed difference from start to stop vs the length between the lights. Again IMPBA and NAMBA rules apply.
Radio Controlled Boats (Page 1 of 2)
A radio controlled boat (or RC boat) is a boat controlled remotely with radio control equipment. Electric Sport boats are the most common type of boat amongst casual hobbyists. Hobby quality boat speed generally start at around 20MPH and go up from there, and can be just as fast or faster than their internal combustion counterparts, with the latest in Lithium Polymer and Brushless motor technology. Ready to run speed boats from Aqua Craft, Pro Boat and Offshore Electrics can reach speeds over 40 mph out of the box and with modifications can reach well into the 50-60 mph range. These types of boats are referred to as hobby grade and can be found only at hobby shops and retailers. Toy grade boats which are obtained through mass consumer retailers, are generally much slower and their maximum speeds are usually less than 15MPH. Scale boats are replicas of full size boats. They can be small enough to fit into your hand, or large, trailer transported models weighing hundreds of pounds. More often than not they are a miniaturized version of a prototype, built using plans and/or photos, although there are variants that utilize freelance designs. An offshoot of this style of marine RC’s is radio controlled submarines.
Power boats are typically Fast electric or internal combustion, (ignition engine or glow plug RC engine based) and some are steam powered (conventional type, and also flash steam). (At one time some boats used engines working on the compression ignition principle. These were not diesels in the true sense of the word but the modelling fraternity frequently referred to them as such. A few enthusiasts still operate such engines.) The power is commonly used to rotate a submerged propeller, aircraft propeller or jet which in turn provide the thrust to move the craft. Typically power boats have two controls, rudder, outboard motor or stern drive and throttle control. Powered scale boats will often have additional remote controlled functions to improve realism, e.g. sounding fog horns, rotating radar antennae etc. Some of the more sophisticated powered racing boats may also have additional remote controlled functions. These may include remote mixture control allowing the driver to optimise the fuel/air mixture during a race. Another function occasionally implemented for racing boats using a surface piercing propellor is remote control of depth or angle of thrust. There are three main types of power boat. RTR (ready to run), ARTR (almost ready to run), and kit versions are available. All thoroughbred racing boats are made from kits and the builders add their own gear and radio.
Radio controlled racing boats are designed for maximum speed and maneuverability. Various styles of racing include circuits of different shapes laid out on the water with buoys. The most common courses are the 1/6 mile oval that consists of 330′ straight sections followed by 70′ diameter turns. The International Model Power Boat Association (IMPBA) as well as the North American Model Boat Association (NAMBA) have specific rules and regulations to address the course, race rules, and formats. In addition to oval racing there are straight a way (SAW) racing. This is a contest to see how fast you can make the boat go in a straight line. Timed events are held where the boats need to go through a starting light and an ending light. The speed is calculated by the timed difference from start to stop vs the length between the lights. Again IMPBA and NAMBA rules apply.
What to Do if Your iPad Won't Turn On
On occasion, you may run into problems using the Apple iPad. One such problem is the hardware failing to turn on. This is rather significant, as without power, you are unable to perform any desired task on the device.
The good news is that there are a few methods for troubleshooting and correcting the power issue. By following a few simple iPad repairs, can have your iPad back up and running within minutes.
Step One: Rebooting Your iPad
Start off by holding the Sleep/Wake button, located at the top of the hardware for a few moments. Eventually a “Power Down” icon appears on the iPad screen. Swipe your finger across the power down option to turn off the device. Often times, the iPad appears to not be turning on, but in actuality it is just frozen or locked. Restarting the device corrects this issue. Leave the iPad off for a few minutes, and then power it back on. Once it completely boots up, the iPad is ready to go and full functionality returns.
Step Two: Resetting Your iPad
If the above step doesnt work, youll need to reset the iPad. Keep in mind that resetting the device restores the hardware to the factory settings, and then uploads all the saved information back onto the equipment (just make sure you follow the steps properly so you dont lose any saved data)
To reset: Connect the iPad to the docking computer and load iTunes. Select the equipment under “My Devices,” then click “Reset” in the middle of the iTunes screen. The hardware then begins to reset. Do not disconnect the equipment from the computer as this may corrupt the hardware. At the top of the iTunes program window, it displays how much longer the rest should take. Once complete, a prompt appears at the top of the screen, notifying you of the completed process and that you are free to disconnect the equipment from the docking computer.
The above are two possible steps that may help if your iPad wont turn on. If you are still having problems, you may want to seek the services of a qualified iPad repair service provider.