Tag Archives: drive
5 Professional Virus Removal Techniques
Virus removal can be tricky for the average computer owner. This is because, depending on the virus you catch, sometimes functions and applications that can be run are limited. In some instances the virus is so bad that the Ctrl + Alt + Delete function cant even be done. Professionals use several different, more complex techniques for virus removal on your desktop or laptop. These techniques are above the level of running anti-virus software and clicking a few different buttons to get the job done and are the biggest reasons people turn to professionals when those simple techniques just dont cut it.
Reconnecting Hard Drive
One technique professionals use is to disconnect the hard drive from the infected computer and reconnect it to a computer that has the latest anti-virus software installed on it. This is good for the computer that has been infected and not protected by anti-virus software. The hard drive is cleaned up by the clean computer. All too often, computers come to professionals that have caught a virus and have absolutely no protection whatsoever by anti-virus software, making it necessary to completely disconnect an infected hard drive and reconnecting it to one that is protected.
Safe Mode
Booting the computer into safe mode will, with some viruses, give the specialist a little bit more wiggle room to get in there and remove the virus themselves without having to resort to more drastic options like disconnecting the hard drive. In safe mode, milder viruses are kept at bay until the worker can maneuver and clear away the virus. Safe mode can also keep your computer safe from additional viruses until the first ones can be taken care of.
Reinstall Hard Drive
Sometimes with medium-toughness viruses, reinstalling the hard drive can give the computer a chance to kind of regroup and fight harder to allow the professional to manually remove viruses from it. Reinstalling the hard drive is one of those “drastic measures” listed above, because its much more difficult than running anti-virus software like with smaller virus pests.
System Restore
In cases where the virus hasnt completely limited the amount of options we can use to remove viruses, a system restore can be achieved. System restores can completely wipe out the hard drive, causing you to lose everything, or they can restore your computer to a date previous to when the problems started, back to a time when the virus wasnt there. System restores can be very effective, but professionals are best to carry them out to prevent any more data loss than necessary.
Advanced Anti-Virus
Anti-virus software that you buy in a store and install on your computer is often quite simple and works best for simple, less complex viruses. Hard-hitting, debilitating viruses, however, sometimes require more advanced and complex anti-virus software. Software like this is most often used by professionals and allows them to get a more firm hold on the virus (especially those tough ones) an eliminate them more thoroughly.
5 Professional Virus Removal Techniques
Virus removal can be tricky for the average computer owner. This is because, depending on the virus you catch, sometimes functions and applications that can be run are limited. In some instances the virus is so bad that the Ctrl + Alt + Delete function cant even be done. Professionals use several different, more complex techniques for virus removal on your desktop or laptop. These techniques are above the level of running anti-virus software and clicking a few different buttons to get the job done and are the biggest reasons people turn to professionals when those simple techniques just dont cut it.
Reconnecting Hard Drive
One technique professionals use is to disconnect the hard drive from the infected computer and reconnect it to a computer that has the latest anti-virus software installed on it. This is good for the computer that has been infected and not protected by anti-virus software. The hard drive is cleaned up by the clean computer. All too often, computers come to professionals that have caught a virus and have absolutely no protection whatsoever by anti-virus software, making it necessary to completely disconnect an infected hard drive and reconnecting it to one that is protected.
Safe Mode
Booting the computer into safe mode will, with some viruses, give the specialist a little bit more wiggle room to get in there and remove the virus themselves without having to resort to more drastic options like disconnecting the hard drive. In safe mode, milder viruses are kept at bay until the worker can maneuver and clear away the virus. Safe mode can also keep your computer safe from additional viruses until the first ones can be taken care of.
Reinstall Hard Drive
Sometimes with medium-toughness viruses, reinstalling the hard drive can give the computer a chance to kind of regroup and fight harder to allow the professional to manually remove viruses from it. Reinstalling the hard drive is one of those “drastic measures” listed above, because its much more difficult than running anti-virus software like with smaller virus pests.
System Restore
In cases where the virus hasnt completely limited the amount of options we can use to remove viruses, a system restore can be achieved. System restores can completely wipe out the hard drive, causing you to lose everything, or they can restore your computer to a date previous to when the problems started, back to a time when the virus wasnt there. System restores can be very effective, but professionals are best to carry them out to prevent any more data loss than necessary.
Advanced Anti-Virus
Anti-virus software that you buy in a store and install on your computer is often quite simple and works best for simple, less complex viruses. Hard-hitting, debilitating viruses, however, sometimes require more advanced and complex anti-virus software. Software like this is most often used by professionals and allows them to get a more firm hold on the virus (especially those tough ones) an eliminate them more thoroughly.
How to reset Windows Vista password when you forget it?
Today data security is an important issue for business and personal users. So as common computer users, were used to set Windows password to protect our files on computer from prying eyes. It is a very good way to protect our privacy, but the problem is that the password for computer can be easily forgotten or lost. Especially when you need to log-on immediately but you cannot remember the password you set. What should you do to regain access to your computer?
Without doubt, I believe reinstalling computer is the easiest way to log-on your computer again. And I also believe it is the last choice for you as no one can afford to lose all your important files after reinstalling. In fact, there is another option for you to get in your computer on your own. You can reset your lost or forgotten Windows password with professional Windows password reset software.
Following Ill show you how to reset Vista password with Windows Password Reset, which allows you to reset Vista password with a bootable CD/DVD or USB flash drive. If your computer operating system is Windows Vista, you can follow it to perform Vista password reset to get in your computer.
====Step 1. Burn a CD/DVD or USB Drive to reset Vista password.
Download Windows Password Reset and install in a computer. And follow the step-by-step guide to burn a CD/DVD or USB drive to reset Vista password.
Note: Windows Password Reset has two editions: Standard and Professional. Windows Password Reset Standard allows you to reset Vista password with a bootable CD/DVD only while Windows Password Reset Professional supports to burn a CD/DVD or USB Flash Drive to reset Vista password.
====Step 2: Set BIOS to boot from CD ROM or USB.
Insert the burned CD/DVD or USB drive in the computer you want to reset Vista password, and then change the BIOS settings of the computer as follows:
1st. Start computer and press F2 or Delete to enter BISO setup during the initial startup screen. Note: What key is pressed depends on the manufacturers, but in most cases it is F2 or Delete.
2nd. Use the arrow keys to select the Boot tab, and then select Boot Device Priority and press Enter. 3rd. Choose first boot device to CDROM or USB flash drive, and then press F10 to save settings. The computer will restart with the changed settings automatically.
Note: When you want to boot from USB, you should adjust USB to 1st Drive by entering Hard Disk Drives firstly before selecting first boot device to USB flash drive.
====Step 3: Remove the forgotten Windows Vista password under DOS.
1st. Choose the installation path of Windows, and enter the ID of the path 2nd. All the user names will be displayed for you. You can select one to remove its password by entering the ID of the User Name. If you want to quit, enter 0. 3rd. Enter y to confirm and continue, enter n to return to previous menu. 4th. After removing the password for the selected user name, you can enter y to continue to reset passwords of other user names, or enter n to restart computer. And now you can log on computer without password.
Note: After selecting n to restart computer, please remember to press any press, and then eject the CD/ DVD or USB Flash Drive.
Tip for Vista password reset: Although you can reset Vista password with software, but its better to set something easy for you to remember but hard for others to guess for your computer. If your password is too long and hard for you to remember, you can write it on paper and keep it in a safe place firstly.
More Info: